Newsletter
News
Doepfer A-111-6v Miniature Synth Vintage Edition
Complete miniature synthesizer voice module vintage edition
VCO
- triangle core VCO
- manual tune control and octave switch
- modulation input for frequency (FM) or pulsewidth modulation (PM)
- manual pulsewidth control
- waveform switch (sawtooth / off / triangle)
- 1V/oct input
- Balance unit : two inverse working VCAs controlled by manual control and CV input, VCA1 is connected to the VCO output, VCA2 to the socket Ext.In. which is normalled to the internal sub-octave signal (f/2)
VCF
- 24 dB low pass, 10Hz ... 20kHz
- manual frequency control
- two frequency modulation inputs, FM1 (with attenuator) is normalled to the internal Envelope signal, FM2 without attenuator (about 1V/oct, e.g. for VCF tracking or sine wave VCO)
- manual resonance (up to self oscillation = sine wave VCO)
VCA
- initial gain (to open the VCA without envelope)
- controlled by internal envelope or gate signal
Envelope
- AR/ADSR/AD mode selectable via switch
- manual controls for Attack and Decay/Release
- Sustain is fixed to 50% in ADSR mode and D=R
- CV input for time control, by means of two internal jumpers one can select which time parameters are controlled by the CVT input (e.g. A only or D/R only or A/D/R) and in which direction (i.e. if an increasing CVT shortens or stretches the time parameter in question)
- Envelope LED display
- Attack time range: ~ 1ms ... 5 sec (can be extended by using the CVT input)
- Decay/Release time range: ~ 1ms ... 15 sec (can be extended by using the CVT input)
Alex4
Alex4 Distribution GmbH
Lessingstr. 98, 100 – Haus 11
13158 Berlin
Germany
www.alex4.de
Tel +49(0)30 - 61 65 100 40
Fax +49(0)30 - 61 65 100 49